26-channel switching board for 26-chanel (up to 50V, 0,5А DC) (RS485 interface). It could be in the net of up to 32 of the same boards.
Controll board of the RFID-card readers net (RS485 interface).
Tuning board for switching board LDM-CS 1.01.
Switching board of power channel with a required algorithm.
Development Kit for design and debugging electrinic schemes based on CPLDs Altera MAX3000A, MAX7000S (EPM3128A, EPM7064S, EPM7128S (TQFP-100)
Development Kit LDM-MP 3.01 is a circuit board 114x81x15mm with precircuit 81x53mm based on ATMEL microcontroller ATmega128.
This circuit board is equipped wilth RS 232 interface. Programming is carried out via COM-port.
ByteBlasterMV LDM-PB 2.01 programmer with LPT-port is for flashing firmware to the following FPGAs: MAX II, MAX 9000, MAX 7000S, MAX 7000AE, MAX 7000B, and MAX 3000A; and also to configure chips: Stratix II, Stratix GX, Stratix, Cyclone III, Cyclone II, Cyclone, APEX II, APEX 20K, ACEX 1K, Mercury, FLEX 10K, FLEX 8000, FLEX 6000 and Excalibur. Programmer allows flashing and configuring chips: EPC2, EPC4, EPC8 and EPC16.
LDM-PA 2.01 programmer with LPT-port is for flashing firmware to the following microcontrollers: AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4414, AT90S4434, AT90S8515, AT90S8535, AT90S2323, AT90S2343, AT90S2333, AT90S4433, AT90S4434, AT90S8535, AT90S8534, ATmega103, ATmega161, ATmega163, ATmega323, ATmega128, ATmega8, ATmega16, ATmega64, ATmega32, ATmega162, ATmega169, ATmega8515, ATmega8535, ATtiny12, ATtiny15, AT89S8252, AT89S53.
Development Kit is a circuit board 100x71x12mm with precircuit 71x50mm based on CPLD Altera EPM3064A (TQFP-44) of MAX 3000A family.
LED board for decorative interior illumination.
Collection and processing data board from cash machines and connection to PC (is used in business machine).
ByteBlaster programmer with LPT-port is for flashing firmware to the following FPGAs: ПЛИС MAX3000A, MAX7000A,S and MAX9000; and also to configure chips: FLEX 10K, FLEX 8000, FLEX 6000.
programmer with LPT-port is for flashing firmware to the following Atmel microcontrollers.
Collection and processing statistic data board from gambling machines (RS-485 or CAN interface).
Gas jet control board of petrol and LPG vehicles.